Radios › Icom

Operate your Icom IC-905 remotely

RemoteMyShack puts your Icom IC-905 in your browser: operate it from your phone, tablet or laptop at yourcall.remotemyshack.com, with two-way audio, its spectrum scope and waterfall, and the controls you use at the shack. A small agent on a computer next to the radio connects to it by Ethernet or USB; there's no VPN or port forwarding to set up.

What works with the IC-905

Connects byEthernet or USB
Bands2m, 70cm, 23cm, 13cm, 6cm
TransmitYes, with push-to-talk from your device
Spectrum scopeYes: the radio's own scope and waterfall, streamed to your screen (more)
D-STARYes: a DV mode button, using the D-STAR settings stored in the radio
Remote power-onYes: it stays reachable on your network while off, so you can switch it on from anywhere
TestedNot by us yet: it uses the same commands as the Icom radios we've tested and is expected to work

The 10 GHz and 24 GHz options aren't supported yet.

What you can do from the console

Setting it up

Install the agent on a Mac, Windows or Linux computer, or a Raspberry Pi, next to the radio, link it to your account, and open yourcall.remotemyshack.com. These articles walk you through it:

Other Icom radios

IC-705 · IC-7100 · IC-7200 · IC-7300 · IC-7300MK2 · IC-7410 · IC-7600 · IC-7610 · IC-7700 · IC-7760 · IC-7800 · IC-7850 · IC-7851 · IC-9100 · IC-9700 · IC-R8600

All supported radios · Compare them in one table

Start your free 14-day trial

No credit card to start. Cancel any time.